Instructions for a Whisper Power Filter By Carolyn Luck. Share on Facebook. The Whisper Power Filter, manufactured by Tetra, incorporates the functioning of a mechanical filter, a biological filter and a chemical filter into one small mechanism that operates in silence. Step 1 Snap the filter cartridge into the Whisper unit. Aug 25, 2013 - Washer fell out of my tetra x30 aquarium filter and I don't know where it fell out of.

Description Ensure your Tetra Whisper Aquarium has the quiet, reliable filtration it needs with the Whisper Power Filter. This easy-to-use system introduces your tank to three stages of filtration—mechanical, chemical and biological—to completely eliminate toxic ammonia and nitrites for a crystal clear aquarium. Its water flow was scientifically engineered to create a continuous flushing action, which can help prevent debris buildup and keep your tank cleaner than ever. Key Benefits • For a crystal clear aquarium, this filter completely eliminates toxic ammonia and nitrites. • Economical and easy to use, even for beginning aquarists. • Provides efficient three-stage filtration—mechanical, chemical and biological.

• The scientifically engineered water flow provides a continuous flushing action to prevent debris buildup. • Optimum outflow maximizes water agitation and oxygenation. Filter not included. Keep your system running smoothly.

Changing the Bio-Bag®: When water flows excessively from the Wonder Tube Chamber into the aquarium, it is time to change the Bio-Bag®. The Bio-Bag® should be changed once per month to prevent backflow and avoid filtration problems resulting from a clogged Bio-Bag®. Using a ready-to-use, assembled Bio-Bag® • Remove filter box cover. Cisco it essentials virtual desktop pc laptop 41 free download. • Lift Bio-Bag® and allow excess water to drain into filter box. • Dispose in garbage can. • Rinse new Bio-Bag®, insert into filter, replace filter cover. Using an unassembled Bio-Bag® • Remove Bio-Bag® from filter, allowing excess water to drain into filter box.

• Remove clip from frame, fold up frame flap, and remove floss bag from frame. Place new floss bag over frame. • Add one packet of Ultra-activated® carbon. • Fold flaps of Aerobic Frame® over filter bag and replace clip. • Rinse Bio-Bag®, insert into filter, replace filter cover. Maintaining the Energizer: Caution: Only remove Energizer when absolutely necessary.

• Unplug power cord, empty filter box, and place it upside down on a flat surface. • Grasp Energizer with one hand and filter box with the other.

Gently turn Energizer counter-clockwise until its sidewall is parallel to the raised line on the bottom of the filter box. • Hold Filter Box with one hand and gently pull the Energizer with the other. (If necessary, rock the Energizer back and forth to ease removal.) • Clean inside of Energizer Well with a Q-tip Cotton Swab. Do not use a metal instrument of any kind. Before replacing Energizer, wet the “o-ring” with water, or coat its surface with a small amount of non-medicated petroleum jelly. • Replace Energizer and fill filter box with water.

Check to be sure that Energizer is seated properly and does not leak. (When seated properly, the red o-ring will not be visible.) • Re-install filter. Cleaning The Wonder Tube®: • Unplug power cord and remove filter box cover. • Lift Wonder Tube® out of filter.

• Remove Magnet Impeller Assembly. • Clean all parts under running water. If needed, use a filter stem spring brush. • The Flow Control Knob can be removed to aid in cleaning. Before replacing the knob, wet its “o-ring” with water, or coat the surface of the o-ring with a small amount of non-medicated petroleum jelly.